Special abutments

 Home / BIOHORIZONS / Special abutments

Special abutments

Ceramic abutments (regular emergence)

Ceramic abutments (regular emergence)
PYRCA 3.0mm platform
PGRCA 4.5mm platform
PBRCA 5.7mm platform

 

Use to fabricate cement-retained, single- or multiple-unit prostheses. Indicated for anterior, esthetic zone. Packaged with an abutment screw (PXAS). Yttria-stabilized Zirconia. Final torque: 30Ncm.

 

 

Titanium Base Abutments

Titanium Base Abutments

Use for anterior cases that require a durable, highly esthetic solution. For cement-retained single and multi-unit prostheses. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy for strength. TiN coated for esthetics. Final torque: 30Ncm.

Note: TP3TBL and TP3TB have 3.0mm platform connections, but the margins flare to 3.5mm.

 

 

  Laser-Lok standard
3.0mm platform TP3TBL TP3TB
3.5mm platform PYTBL PYTB
4.5mm platform PGTBL PGTB
5.7mm platform PBTBL PBTB

Waxing Sleeves for Titanium Base Abutments

Waxing Sleeves for Titanium Base Abutments

Use as a foundation to create a full contour wax-up. Packaged in packs of three. Acetal resin (Delrin® or Pomalux®) sleeve.

 

PYTBWS 3.0/3.5mm platform (pack of 3)
PGTBWS 4.5mm platform (pack of 3)
PBTBWS 5.7mm platform (pack of 3)
PYTBWSI 3.0/3.5mm platform, indexed (pack of 3)
PGTBWSI 4.5mm platform, indexed (pack of 3)
PBTBWSI 5.7mm platform, indexed (pack of 3)

Custom Ti Abutments

Custom Ti Abutments

Use to create patient-specific abutments for cement-retained, single-or multiple-unit prostheses. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. 3.5 mm, 4.5mm and 5.7mm abutments are packaged with a standard abutment screw (PXAS). 3.0mm abutment is packaged with a narrower blue abutment screw (PXMUAS). Titanium Alloy. Final torque: 30Ncm.

 

  Laser-Lok standard
3.0mm platform TP3BPAL TP3BPA
3.5mm platform PYBPAL PYBPA
4.5mm platform PGBPAL PGBPA
5.7mm platform PBBPAL PBBPA

Laser-Lok Protective Sleeves

Laser-Lok Protective Sleeves

Use to protect the Laser-Lok zone of Titanium Base Abutments and Custom Ti Abutments from possible contamination and damage during lab processing.

 

TP3TBLS 3.0mm platform, Laser-Lok
PYTBLS 3.5mm platform, Laser-Lok
PGTBLS 4.5mm platform, Laser-Lok
PBTBLS 5.7mm platform, Laser-Lok
  •   Strahinjića Bana 74/7,
         11000 Beograd, Srbija
  •  +381 11 3286256
  •  +381 11 2620546
  •   +381 62 830 1831 (Viber)
  • info@dentalant.net