Straight Multi-unit abutments may be used for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC). Final torque: 30 Ncm using a Multi-unit Hex Adapter.
Titanium alloy.
1mm collar | 2mm collar | 3mm collar | 4mm collar | 5mm collar | |
---|---|---|---|---|---|
3.0mm platform | TP3MU1 | TP3MU2 | TP3MU3 | - | - |
3.5mm platform | PYMU1 | PYMU2 | PYMU3 | PYMU4 | PYMU5 |
4.5mm platform | PGMU1 | PGMU2 | PGMU3 | PGMU4 | PGMU5 |
5.7mm platform | PBMU1 | PBMU2 | PBMU3 | - | - |
17° Angled Multi-unit abutments may be used to angle-correct divergent implants. Use for multiple-unit restorations including: screw-retained
restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC)
and abutment screw (PXMUAS). Final torque: 30 Ncm. Titanium alloy. Conveniently deliver abutment one-handed using an .050 hex or Unigrip™
driver or two-handed using an angled Multi-unit carrier (MUCA).
2.25mm collar | 3mm collar | 4mm collar | |
---|---|---|---|
3.0mm platform | TP3MU172 | TP3MU173 | - |
3.5mm platform | PYMU172 | PYMU173 | PYMU174 |
4.5mm platform | PGMU172 | PGMU173 | PGMU174 |
30° Angled Multi-unit abutments may be used to angle-correct divergent implants. Use for multiple-unit restorations including: screw-retained
restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC)
and abutment screw (PXMUAS). Final torque: 30 Ncm. Titanium alloy. Conveniently deliver abutment one-handed using an .050 hex or Unigrip™
driver or two-handed using an angled Multi-unit carrier (MUCA).
3mm collar | 4mm collar | 5mm collar | |
---|---|---|---|
3.0mm platform | TP3MU303* | TP3MU304* | - |
3.5mm platform | PYMU303 | PYMU304 | PYMU305 |
4.5mm platform | PGMU303 | PGMU304 | PGMU305 |
Use parallel pins to assess implant angulation and estimate which angled
abutment is appropriate for the restoration.
144-100 | Straight Parallel Pins |
---|---|
144-200 | 20º Angled Parallel Pin |
144-230 | 30º Angled Parallel Pin |
PXMUHAM Manual Multi-unit Hex Adapter
Use to hand tighten straight Multi-unit abutments.
PXMUHAH Handpiece Multi-unit Hex Adapter
Use to torque straight Multi-unit abutments. Driven by latch-type
handpiece. Do not exceed 30 Ncm.
PXMUHAR 4mm Square Multi-unit Hex Adapter
Use to torque straight Multi-unit abutments. Driven by 4mm square
drive handwrench, ratchet, or torque wrench. Do not exceed 30 Ncm.
PXMUDC Direct Pick-up Coping, Multi-unit
Use to make a direct pick-up impression (open-tray) at the abutment level.
Packaged with a prosthetic screw, long (PXMUPSL). Titanium alloy. Hand tighten.
PXMUIC Indirect Transfer Coping, Multi-unit
Use to make an indirect transfer (closed-tray) impression at the abutment
level. Titanium alloy. Hand tighten.
PXMUTC
Titanium
Use for fabricating acrylic temporary and final prostheses. May be trimmed for height. Packaged with prosthetic screw (PXMUPSR). Titanium alloy.
PXMUPC
Plastic Custom Castable
Use for fabricating metal-reinforced acrylic prostheses or bar overdentures.
May be trimmed for height. Packaged with prosthetic screw (PXMUPSR).
Acetal resin (Delrin® or Pomalux®)
PXMUPFC
Passive Fit
Use for fabricating metal-reinforced acrylic prostheses or bar overdentures, cemented using the passive-fit technique.
May be trimmed for height. Packaged with regular and long prosthetic screws
(PXMUPSR, PXMUPSL). Coping has a titanium alloy base with acetal resin (Delrin® or Pomalux®) sleeve.
Use for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes packaged with a cover cap (PXABCC).
Finaltorque: 30Ncm. Can also be used with tissue-level implants. Titanium Alloy.
PYAFS1 PYAFS3 PYAFS5 |
3.5mm platform, 1mm collar height 3.5mm platform, 3mm collar height 3.5mm platform, 5mm collar height |
---|---|
PGAFS1 PGAFS3 PGAFS5 |
4.5mm platform, 1mm collar height 4.5mm platform, 3mm collar height 4.5mm platform, 5mm collar height |
PBAFS1 PBAFS3 |
5.7mm platform, 1mm collar height 5.7mm platform, 3mm collar height |
Comes packaged with a cover cap (PXABCC) and abutment screw (PXAS). Final torque: 30Ncm.
Can also be used with tissue-level implants. Titanium Alloy.
PYAFS17 | 3.5mm platform, 17 degree |
---|---|
PGAFS15 PGAFS25 |
4.5mm platform, 15 degree 4.5mm platform, 25 degree |
PBAFS15 | 5.7mm platform, 15 degree |
PXABPC
Plastic Coping, Abutment for Screw
May be trimmed for height. Packaged with one Screw (regular), Abutment for
Screw (see PXABS). Delrin® sleeve.
PXIFO
Instant Fixed Overdenture Coping
Use with Abutments for Screw for fabrication of immediate provisional overdentures. See Fixed Provisional Overdenture Technique (L0155) for more details. Packaged with one Screw (regular), Abutment for Screw (see PXABS). Abutment height is 9mm. Final torque: 30Ncm. Titanium Alloy.
PXHA*
Hex Adapter, Abutment for Screw
Use to place Abutment for Screw. May be driven by either Hand Wrench, Torque
Wrench or AS123 Hand Unit.
PXABDC
Direct Pick-up Coping, Abutment for Screw
Use to make a direct pick-up impression (open-tray) at the abutment level. Packaged with the Screw (long), Abutment for Screw (PXABSL). Use only with Abutment for Screw. Titanium Alloy.
PXABIC
Indirect Transfer Coping, Abutment for Screw
Use to make an indirect transfer (closed-tray) impression at the abutment level.
Use only with Abutment for Screw. Titanium Alloy.
PXABA
Analog, Abutment for Screw
Use at lab to represent the Abutment for Screw/Implant assembly in the working cast.
Not for use with implant-level impressions.
PXABS Screw (regular), Abutment for Screw (5 pack)
Use to retain bars or prostheses fabricated with the Abutment for Screw Copings. Utilizes the .050" (1.25mm) Hex Driver. Final torque: 30 Ncm. Titanium Alloy.
PXABSL Screw (long), Abutment for Screw (5 pack)
Use in the lab when a longer screw is desired. Use only with the Abutment for Screw. Up to 7mm can be removed from the screw without losing the hex engagement. Hand-tighten or torque to 30Ncm depending on application. Titanium Alloy.