Use to fabricate cement-retained, single- or multiple-unit prostheses. Indicated for anterior, esthetic zone. Packaged with an abutment screw (PXAS). Yttria-stabilized Zirconia. Final torque: 30Ncm.
Use for anterior cases that require a durable, highly esthetic solution. For cement-retained single and multi-unit prostheses. When a Laser-
Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy for strength. TiN coated for esthetics. Final torque: 30Ncm.
Note: TP3TBL and TP3TB have 3.0mm platform connections, but the margins flare to 3.5mm.
Use as a foundation to create a full contour wax-up. Packaged in packs of three. Acetal resin (Delrin® or Pomalux®) sleeve.
|PYTBWS||3.0/3.5mm platform (pack of 3)|
|PGTBWS||4.5mm platform (pack of 3)|
|PBTBWS||5.7mm platform (pack of 3)|
|PYTBWSI||3.0/3.5mm platform, indexed (pack of 3)|
|PGTBWSI||4.5mm platform, indexed (pack of 3)|
|PBTBWSI||5.7mm platform, indexed (pack of 3)|
Use to create patient-specific abutments for cement-retained, single-or multiple-unit prostheses. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. 3.5 mm, 4.5mm and 5.7mm abutments are packaged with a standard abutment screw (PXAS). 3.0mm abutment is packaged with a narrower blue abutment screw (PXMUAS). Titanium Alloy. Final torque: 30Ncm.
Use to protect the Laser-Lok zone of Titanium Base Abutments and Custom Ti Abutments from possible contamination and damage during lab processing.
|TP3TBLS||3.0mm platform, Laser-Lok|
|PYTBLS||3.5mm platform, Laser-Lok|
|PGTBLS||4.5mm platform, Laser-Lok|
|PBTBLS||5.7mm platform, Laser-Lok|