Overdenture

 Home / BIOHORIZONS / Overdenture

Overdenture

Straight Multi-unit Abutments

Straight Multi-unit Abutments

Straight Multi-unit abutments may be used for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC). Final torque: 30 Ncm using a Multi-unit Hex Adapter.

 

Titanium alloy.

 

 

 

  1mm collar 2mm collar 3mm collar 4mm collar 5mm collar
3.0mm platform TP3MU1 TP3MU2 TP3MU3 - -
3.5mm platform PYMU1 PYMU2 PYMU3 PYMU4 PYMU5
4.5mm platform PGMU1 PGMU2 PGMU3 PGMU4 PGMU5
5.7mm platform PBMU1 PBMU2 PBMU3 - -

 

Multi-unit Copings

Multi-unit Copings Titanium

PXMUTC

Titanium

 

Use for fabricating acrylic temporary and final prostheses. May be trimmed for height. Packaged with prosthetic screw (PXMUPSR). Titanium alloy.

 

 

 

Plastic Custom Castable

PXMUPC

Plastic Custom Castable

 

Use for fabricating metal-reinforced acrylic prostheses or bar overdentures.
May be trimmed for height. Packaged with prosthetic screw (PXMUPSR).
Acetal resin (Delrin® or Pomalux®)

 

 

Passive Fit

PXMUPFC

Passive Fit

 

Use for fabricating metal-reinforced acrylic prostheses or bar overdentures, cemented using the passive-fit technique.
May be trimmed for height. Packaged with regular and long prosthetic screws
(PXMUPSR, PXMUPSL). Coping has a titanium alloy base with acetal resin (Delrin® or Pomalux®) sleeve.

Straight Abutment for Screw - Non-hexed

Straight Abutment for Screw - Non-hexed

Use for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes packaged with a cover cap (PXABCC).

 

Finaltorque: 30Ncm. Can also be used with tissue-level implants. Titanium Alloy.

 

 

 

PYAFS1
PYAFS3
PYAFS5
3.5mm platform, 1mm collar height
3.5mm platform, 3mm collar height
3.5mm platform, 5mm collar height
PGAFS1
PGAFS3
PGAFS5
4.5mm platform, 1mm collar height
4.5mm platform, 3mm collar height
4.5mm platform, 5mm collar height
PBAFS1
PBAFS3
5.7mm platform, 1mm collar height
5.7mm platform, 3mm collar height

 

Angled Abutment for Screw - Hexed

Angled Abutment for Screw - Hexed

Comes packaged with a cover cap (PXABCC) and abutment screw (PXAS). Final torque: 30Ncm.

 

Can also be used with tissue-level implants. Titanium Alloy.

 

 

 

 

PYAFS17 3.5mm platform, 17 degree
PGAFS15
PGAFS25
4.5mm platform, 15 degree
4.5mm platform, 25 degree
PBAFS15 5.7mm platform, 15 degree

 

Instant Fixed Overdenture Coping - Non-hexed

PXIFO

Instant Fixed Overdenture Coping

 

Use with Abutments for Screw for fabrication of immediate provisional overdentures. See Fixed Provisional Overdenture Technique (L0155) for more details. Packaged with one Screw (regular), Abutment for Screw (see PXABS). Abutment height is 9mm. Final torque: 30Ncm. Titanium Alloy.

 

LOCATOR Abutments

LOCATOR Abutments

Locator Implant Attachments are designed for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. Order by cuff height to match the height of the gingival tissue. The abutment will extend above the tissue by 1.8mm to allow the Locator Male to seat completely. Order one Locator Male Processing Set for each Locator Abutment (sold in packs of 2 or 10). Can also be used with tissue-level implants. Titanium Alloy.
The Male Processing Package provides 3 choices of retention. The Replacement Males (clear, pink and blue) are used to restore implants with up to 10° of divergence (20° between implants). The Extended Range Replacement Males (green and red) accommodate divergences from 10° and 20° (40° between implants), and may be purchased separately.

 

  3.0mm platform 3.5mm platform 4.5mm platform 5.7mm platform
0mm cuff height not available PYLA0 PGLA0 not available
1mm cuff height TP3LA1 PYLA1 PGLA1 PBLA1
2mm cuff height TP3LA2 PYLA2 (2.5mm) PGLA2 PBLA2
3mm cuff height TP3LA3 PYLA3 (3.5mm) PGLA3 PBLA3
4mm cuff height TP3LA4 PYLA4 (4.5mm) PGLA4 PBLA4
5mm cuff height TP3LA5 PYLA5 (5.5mm) PGLA5 PBLA5
6mm cuff height TP3LA6 PYLA6 (6.5mm) PGLA6 PBLA6

 

  •   Strahinjića Bana 74/7,
         11000 Beograd, Srbija
  •  +381 11 3286256
  •  +381 11 2620546
  •   +381 62 830 1831 (Viber)
  • info@dentalant.net